4
3
4
4-30
Transparency Interleaving
● If you select [Stack Bypass Settings], or transparencies are not set
in the stack bypass:
❑
Select the paper size for transparencies ➞ press [Next].
❑
Select the paper type ➞ press [OK].
If the desired paper type is not displayed, press [Detailed Settings] ➞ select
the paper type from the list ➞ press [OK].
❑
Press [Next].
If the following screen is displayed, perform either of the following procedures
in Common Settings (from the Additional Functions screen) (See Chapter 4,
"Customizing Settings," in the
•
Set Register Paper Type for the selected paper source to [Transparency].
•
Set the paper type setting to [Transparency] if Stack Bypass Standard
Settings is set to 'On'.
IMPORTANT
Make sure that transparencies are loaded into the selected paper source. Loading
paper types other than transparencies may result in a paper jam.
Select whether to copy on the interleaf sheets ➞ press [Next].
Select the paper source for the interleaf sheets ➞ press [OK].
NOTE
•
If you are copying onto the interleaf sheets, these sheets are included in the count
of the total number of copies made.
•
The copies are output with the copied side face down, alternating between
transparency and interleaf sheet.
Reference Guide
.):