● If you want to select a standard paper size:
❑
Press [Stack Bypass].
If you want to select the stack bypass when a paper size/type is already
selected for the current or reserved job, press [Stack Bypass Settings] to
specify the desired paper size/type.
❑
Select the desired paper size ➞ press [Next].
NOTE
To select an A or B series paper size, press [A/B-size].
❑
Select the desired paper type ➞ press [OK].
If you want to adjust the thickness of the toner applied to the paper, press
[Plain Ppr Print Set.]. If too much toner is being applied to the paper, press
[Thin]. If not enough toner is being applied to the paper, press [Heavy].
2-27
Paper Selection
2