Canon Color imageRUNNER C3480 Manual page 237

3
Set the number of times that you want the image to repeat for
both the vertical and horizontal directions.
● If you want to set the number of repeats automatically:
❑
Press [Auto].
If [Auto] is already selected, this step is not necessary.
● If you want to set the number of repeats manually:
❑
Press [-] or [+] to set the number of times that you want the image to repeat.
IMPORTANT
The repeated images may overlap or have gaps between them, depending on the
number of repeats that you set.
4
If you want only a designated area on the original to be
repeated, press [Framing].
If you are not designating an area to repeat, proceed to step 6.
5
Designate the area.
NOTE
If you designate an area using the edit pen, the output image may not reflect the
designated area precisely. To designate an area precisely, entering values by using
the numeric keys is recommended.
● Using the edit pen:
❑
Press [Pen Entry].
❑
Press [Start Scan].
IMPORTANT
Check that the original is placed on the platen glass.
Using Image Creation Modes
4
4-59