4
4
4-24
Booklet Mode
Specify the Booklet settings.
● If the optional Saddle Finisher-Y2 is attached:
❑
Select whether to saddle stitch the booklet ➞ press [OK].
❑
If you select [Divided Booklet], enter the number of sheets that you want to
divide by pressing [-] or [+] ➞ press [OK] ➞ [OK].
❑
If the printing position of the image is out of place, and you want to set the
creep (displacement) correction, press [Creep Correction] ➞ select [Auto] or
[Manual] ➞ press [OK] ➞ [OK].
If you select [Manual], press [ ] or [ ] to adjust the correction width.
● If the optional Saddle Finisher-Y2 is not attached:
❑
Press [Do not correct] or [Auto] or [Manual] ➞ press [OK].
If you select [Manual], press [ ] or [ ] to adjust the correction width.
IMPORTANT
The maximum number of sheets, including cover sheets, that can be saddle
stitched is:
- 15 sheets (17 to 20 lb bond (64 to 80 g/m
- 10 sheets (20 to 28 lb bond (81 to 105 g/m
NOTE
•
If the number of sheets is 16 or more, the booklet is not saddle stitched.
•
The number of saddle stitched booklets that the booklet tray can hold depends on
the number of sheets that each booklet contains.
- 1 to 5 sheets: 25 sets
- 6 to 10 sheets: 15 sets
- 11 to 15 sheets: 10 sets
•
If you selected [Add Cover], the maximum number of sets that the booklet tray can
hold is 10.
•
If you set the Booklet mode, the Center Shift mode is also automatically set.
2
))
2
))