Selecting the Number of Output Pages
You can enlarge an original in the Poster mode by setting the number of output
pages that the original image should be copied over.
1
2
3
3
4
5
6
3-28
Changing the Copy (Zoom) Ratio
Place your originals on the platen glass ➞ press [Copy Ratio].
If necessary, see the screen shot in step 1 of "Copying" in "Preset Zoom," on p.
3-9.
Press [Poster].
If necessary, see the screen shot in step 2 of "Specifying the Copy Ratio in
Percentage," on p. 3-26.
Press [Number Of Output Pages] ➞ [Next].
Press [Paper Select].
Select the desired paper size ➞ press [Done].
If you select the stack bypass, the screens for specifying the paper size and
paper type in the stack bypass are displayed.
Select the number of output pages ➞ press [OK].
Refer to the table under "Determining the Copy Ratio and Number of Sheets
Needed," on p. 3-26 as a guideline for specifying the number of output pages.