Auto Collate; Auto Orientation - Canon Color imageRUNNER C3480 Manual

Auto Collate

If Auto Collate is set to 'On', the machine automatically sets the Collate (Offset
Collate) mode when originals are placed in the feeder. This is useful when making
multiple sets of copies, because you do not need to remember to select the
Finishing mode.
IMPORTANT
The Auto Collate mode is available only if the optional Feeder (DADF-L1) is attached
(standard equipped for the Color imageRUNNER C3480i/C3080i).
NOTE
If Auto Collate is set to 'On' and an optional finisher is attached, the Offset Collate mode
is set. However, if no finisher is attached, the Collate mode is set instead.
1
Press
Collate].
2
Select [On] or [Off] ➞ press [OK].

Auto Orientation

If Auto Orientation is set to 'On', the machine uses information, such as the size of
the original and the zoom ratio, to determine the most suitable orientation for the
specified paper size and automatically rotates the image, if necessary.
1
Press
Orientation].
2
Select [On] or [Off] ➞ press [OK].
NOTE
•
If LTR or STMT originals are enlarged onto 11" x 17" or LGL copy paper, Auto
Orientation is not performed even if you select [On].
•
Only the images of standard size originals, up to LTR paper, can be rotated when
the copy ratio is set to 100%.
•
If Automatic Paper Selection is set and the most suitable paper size is not
available, the paper source that is loaded with paper of the same size, even if the
orientation is different, is displayed as the optimal paper to use.
(Additional Functions) ➞ [Copy Settings] ➞ [Auto
(Additional Functions) ➞ [Copy Settings] ➞ [Auto
Customizing Copy Settings
8
8-9