Making Copies By The Original Image Repeated (Image Repeat) - Canon Color imageRUNNER C3480 Manual

4
Press [Framing] or [Blanking].
Details of each item are shown below.
[Framing]: Copy only the contents of the designated area while discarding the
rest of the original.
[Blanking]: Copy the original by blanking out the contents of the designated area.
5
Press [Next] ➞ select [Shift center] or [Do not shift center].
If only [Blanking] is selected, this step is unnecessary. Skip to step 6.
6
Press [OK] ➞ [Done].
Making Copies by the Original Image Repeated (Image
Repeat)
For instructions on this procedure using the Regular Copy Basic Features screen,
see "Image Repeat," on p. 4-57.
IMPORTANT
•
To use Area Designation (Framing) with the Image Repeat mode, first specify the Image
Repeat mode, and then designate the desired area. Only one area can be designated.
•
If the color mode is set to 'Auto-Color Select', and the number of times the image to be
repeated is set to too many or the designated area is too small, the color original may be
scanned in the Black mode.
1
Press [Process/Layout] ➞ [Image Repeat].
Process/Layout Settings
7
7-71