Job Build - Canon Color imageRUNNER C3480 Manual

Copying and mail box guide
Hide thumbs Also See for Color imageRUNNER C3480:
Table of Contents

Advertisement

Job Build

This mode enables you to scan originals that are too many to be placed at once, by
dividing them into multiple batches. You can use both the feeder and the platen
glass for scanning. When copying, the originals are printed as one document after
all of the batches have been scanned. When storing a document in an inbox, the
originals are stored as one document after all of the batches have been scanned.
IMPORTANT
The 2-Sided Original mode is available only if the optional Feeder (DADF-L1) is attached
(standard equipped for the Color imageRUNNER C3480i/C3080i).
For information on the modes which cannot be set in combination with this mode, see
"Combination of Functions Chart," on p. 9-6.
You cannot change the copy settings while the machine is scanning originals in the Job
Build mode. You need to set the necessary copy/scan settings beforehand, according to
the type of originals or the desired result.
If you place your originals in the feeder, remove the originals from the original output area
when the scanning of each batch is complete.
When copying, you can change or specify the following settings before scanning the next
batch of originals (i.e., between batches): the number of copies, 2-Sided Original mode,
original type, copy exposure, color mode, and copy ratio. However, if you specify the
Image Combination mode together with the Job Build mode, you cannot change the copy
exposure, original type, color mode, and copy ratio.
When storing a document in an inbox, you can change or specify the following settings
before scanning the next batch of originals (i.e., between batches): the 2-sided Original
mode, original type, scan exposure, color mode. However, you cannot change the
original type, scan exposure, and color mode, while the machine is scanning originals in
the Image Combination mode.
If you use the Job Block Combination mode, the Job Build mode is automatically set for
each batch of originals. You cannot use the Job Build mode for the combined document.
Originals
Copies

Job Build

4
4-51

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents