Copying Separately-Set Originals (Job Build) - Canon iR3300 Copying Manual

Copying Separately-set Originals Copying Separately-set Originals Copying Separately-set Originals Copying Separately-set Originals
This mode enables you to scan too many originals to set at once, by dividing them into multiple
batches. You can use both the feeder and the platen glass for scanning. The originals are copied as
one document after all batches have been scanned.
IMPORTANT
• • • •
You cannot change the copy settings while scanning originals in the Job Build mode. You need to set the necessary
settings beforehand according to the type of original or the desired Finisher mode.
• • • •
However, you can change or specify the following before scanning the next originals, i.e., between jobs: the number of
copies, image quality, exposure and 2-sided mode.
• • • •
When you place each original in the feeder, continue to remove each original from the original output area when
scanning is completed.
NOTE
• • • •
When you place different-size originals in the feeder, set the Different Size Originals mode.
• • • •
When you want to copy one-sided and two-sided originals as two-sided copies, set the 1
if the first batch of originals is one-sided. If the first batch is two-sided, then set the 2
scan the next original, set or cancel the Two-sided Original mode according to the type of original.
• • • •
It is useful to store originals in a mail box and print them with the Merge Documents mode when you cannot prepare the
originals at one time, or when you want to set different settings for each original. (See the Mail Box Function Guide.)
2-44 2-44

Copying Separately-set Originals (Job Build)

2-44 2-44
Originals Originals Originals Originals
(Job Build) (Job Build)
(Job Build) (Job Build)
Copies Copies
Copies Copies
2-Sided mode beforehand,
2-Sided mode beforehand. To