Enlarging/Reducing Originals with Copy Ratios Set
Independently for the X and Y Axes (XY Zoom)
For instructions on this procedure using the Regular Copy Basic Features screen,
see "Setting the X and Y Axes Independently," on p. 3-21.
IMPORTANT
•
You cannot enlarge/reduce highly transparent originals, such as transparencies, in the
Auto XY Zoom mode. To make such copies, specify the copy ratio.
•
If you set the Auto XY Zoom mode, select the paper size using the Manual Paper
Selection mode. If you do not select a paper size, paper drawer 1 is automatically
selected and the copy (zoom) ratio is set to match the size of the paper loaded in that
drawer.
•
If you set the copy (zoom) ratio in the Auto XY Zoom mode, Auto Orientation is not
performed.
1
Press [Other Ratio Settings] ➞ [XY Zoom].
2
Press [X] (horizontal axis) or [Y] (vertical axis) ➞ enter a value.
Press [Auto XY Zoom] to set the copy ratios automatically.
3
Press [Done].
Making a Copy With the Express Copy Basic Features Screen
7
7-17