Prevent Bleeding
1
Press [Image Adjustment] ➞ [Image Quality Adjustment].
2
Press [Prevent Bleed-thru].
If you want to make fine adjustments to the density, press [Fine Adj.].
3
Press [Done].
Adjusting the Color (Color Balance)
For instructions on this procedure using the Regular Copy Basic Features screen,
see "Adjusting the Color," on p. 4-73.
1
Press [Image Adjustment] ➞ [Color Balance].
2
Press [-] or [+] to adjust the strength of each color.
If you want to adjust the saturation level, press [Saturatn] ➞ specify the setting.
If you want to adjust the hue level, press [Hue] ➞ specify the setting.
If you want to make fine adjustments for each color, press [Density Fine Adj.] ➞
specify the setting.
To register the specified color balance settings, press [Recall/Store] ➞ select the
key to recall color balance settings from ➞ press [Register].
To recall the specified color balance settings, press [Recall/Store] ➞ select a key
that already has settings stored on it.
To name the specified color balance settings, press [Recall/Store] ➞ select a key
that already has settings stored in it ➞ press [Register Name].
Image Adjustment Settings
7
7-83