Canon Color imageRUNNER C3480 Manual page 403

3
For each batch of originals, specify the copy settings ➞ press
(Start).
For instructions on specifying copy settings and the available combinations of
settings, see chapters 3 and 4.
If you are scanning two or more batches of originals, press [Recall Last Setting]
to return to the copy settings for the previous batch.
4
Check the settings on the Scan screen.
You can change or specify the Color Mode, 2-Sided Original, Copy Ratio,
Original Type or Copy Exposure mode before scanning the next batch of
originals (i.e., between batches).
If you want to continue to scan another batch of originals without changing the
copy settings, place your originals and press
If you want to rescan or cancel the current batch of originals, press [Clear/
Re-enter This Block] and repeat the procedure from step 3.
If you want to change the copy modes and scan another batch of originals, press
[Next Block] and repeat the procedure from step 3.
5
When you have finished scanning all of your originals, press
[Conf./Combine All Blocks].
You can also press [Conf.Blocks] in step 3 to proceed to step 6.
(Start).
Making Copies with Job Done Notice (Others)
7
7-87