Making A Copy With The Express Copy Basic Features Screen; Automatic Color Selection - Canon Color imageRUNNER C3480 Manual

Making a Copy With the Express Copy Basic
Features Screen
This section explains the basic procedure for making a copy with the Express Copy
Basic Features screen.
IMPORTANT
For information on the modes which cannot be set in combination with these modes, see
"Combination of Functions Chart," on p. 9-6.

Automatic Color Selection

For instructions on this procedure using the Regular Copy Basic Features screen,
see "Changing Color Modes," on p. 3-56.
IMPORTANT
•
When the Auto-Color Select mode is set and your originals contain color sections, the
machine scans them in the Full Color mode. However, the machine may scan the color
originals in the Black mode under the following conditions. To avoid this, set the color
mode to 'Full Color'.
- If the originals contain a few color sections
- If the color sections are located on the left side (within 3/8" (10 mm) from the left edge)
of the originals when loading the originals in the feeder
- If the color sections of the originals are close to black
- If the originals contain light color densities
•
If the Single Color mode is selected, you can select Red, Green, Blue, Yellow, Magenta,
or Cyan as the color.
•
If the Two Colors mode is selected, you can select Red, Green, Blue, Yellow, Magenta, or
Cyan as the color.
•
If you scan different sized originals without setting the Different Size Originals mode or
selecting a non-standard paper size as the paper size, the machine may not be able to
detect whether your originals are color or black-and-white.

Making a Copy With the Express Copy Basic Features Screen

7
7-9