Memory Keys
You can set any possible combination of scan settings, print settings, or copy
settings, and then store them in a memory key. There are nine memory keys, and
they can be assigned names for increased convenience. This feature is useful for
storing frequently used scan, print, and copy settings.
NOTE
The scan, print, and copy settings stored in memory are not erased, even if the power is
turned OFF.
Storing Scan/Print/Copy Settings
5
IMPORTANT
You cannot store the Job Block Combination mode in Mode Memory.
Copying
1
2
3
5-4
Memory Keys
Specify the copy settings on the Copy Basic Features screen
and/or Special Features screen.
Press [Special Features] ➞ [Mode Memory].
Select a key ([M1] to [M9]) for storing the settings ➞ press
[Register].