Using The Numeric Keys - Canon Color imageRUNNER C3480 Manual

8

Using the Numeric Keys

1
2
7
3
7-70
Process/Layout Settings
Press [OK] ➞ [Done].
If you need to designate the same area for multiple originals, remove the original
from the platen glass ➞ place all of the originals in the feeder ➞ press
Press [Process/Layout] ➞ [Area Designation].
Press [No. Key Entry].
IMPORTANT
•
Before performing the next step, you must manually measure the size and position
of the area that you want to designate on the original.
•
When you measure the XY values, always start measuring from the image out to
the right side edge of the original, and up to the top of the original. These
measurements tell the machine the desired framed area's size and position.
Press [X1], [X2], [Y1], and [Y2] ➞ use
specify the respective measurements.
[X1]: The distance of the area's right border to the original's right edge.
[X2]: The distance of the area's left border to the original's right edge.
[Y1]: The distance of the area's top border to the original's top edge.
[Y2]: The distance of the area's bottom border to the original's top edge.
You can designate up to four areas.
(Start).
- (numeric keys) to