2
2-28
Paper Selection
If the desired paper type is not displayed, press [Detailed Settings] ➞ select
the paper type from the list ➞ press [OK].
If you are printing on the back side of a previously printed sheet, press [2nd
Side of 2-Sided Page].
NOTE
•
[Transparency] can be selected only if [LTR] is selected as the paper size.
•
You can register paper types that are not displayed on the detailed settings list in
[Selecting the Paper Type]. For more information on storing the paper type, see
Chapter 6, "System Manager Settings," in the Reference Guide.
● If you want to select a nonstandard paper size:
❑
Press [Stack Bypass].
If you want to select the stack bypass when a paper size/type is already
selected for the current or reserved job, press [Stack Bypass Settings] to
specify the desired paper size/type.
❑
Press [Irreg. Size].
❑
Press [X] (horizontal axis) ➞ enter a value.
❑
Press [Y] (vertical axis) ➞ enter a value.
❑
Press [OK].
You can also press a size key in which a paper size is registered ([S1] to [S5]),
instead of entering a value.