1
1-16
Paper Selection
❑
Press [OK].
You can also press a size key in which a paper size is registered ([S1] to [S5]),
instead of entering a value.
NOTE
To recall a paper size from a size key ([S1] to [S5]), it is necessary to register a
paper size in that key beforehand. For instructions on registering a paper size, see
Chapter 4, "Customizing Settings," in the Reference Guide.
❑
Press [Next].
❑
Select the desired paper type ➞ press [OK].
If you want to adjust the thickness of the toner applied to the paper, press
[Plain Ppr Print Set.]. If too much toner is being applied to the paper, press
[Thin]. If not enough toner is being applied to the paper, press [Heavy].
If the desired paper type is not displayed, press [Detailed Settings] ➞ select
the paper type from the list ➞ press [OK].
If you are copying onto the back side of a previously printed sheet, press [2nd
Side of 2-Sided Page].
IMPORTANT
If you select a nonstandard size paper, the Poster, Rotate Collate, Rotate Group,
Offset Collate, Offset Group, Staple, Hole Punch, 1 2-Sided, 2 2-Sided,
Book 2-Sided, 2-Page Separation, Cover/Sheet Insertion, Image Combination,
Booklet, Transparency Interleaving, Job Block Combination, or Store In User Inbox
mode cannot be specified.