Canon Color imageRUNNER C3480 Manual page 50

1
1-28
Reserved Copying
● If you want to select a nonstandard paper size:
❑
Press [Irreg. Size].
❑
Press [X] (horizontal axis) ➞ enter a value.
❑
Press [Y] (vertical axis) ➞ enter a value.
❑
Press [OK].
You can also press a size key in which a paper size is registered ([S1] to [S5]),
instead of entering a value.
NOTE
To recall a paper size from a size key ([S1] to [S5]), it is necessary to register a
paper size in that key beforehand. For instructions on registering a paper size, see
Chapter 4, "Customizing Settings," in the Reference Guide.
❑
Press [Next].
❑
Select the desired paper type ➞ press [OK].
If you want to adjust the thickness of the toner applied to the paper, press
[Plain Ppr Print Set.]. If too much toner is being applied to the paper, press
[Thin]. If not enough toner is being applied to the paper, press [Heavy].
If the desired paper type is not displayed, press [Detailed Settings] ➞ select
the paper type from the list ➞ press [OK].
If you are copying onto the back side of a previously printed sheet, press [2nd
Side of 2-Sided Page].
● If you want to select an envelope size:
❑
Press [Envelope].
❑
Select the desired envelope type ➞ press [OK].
IMPORTANT
•
If the envelope type is not set correctly, a paper jam will occur.
•
If you use envelopes that have glue attached to their flaps, the glue may melt due to
the heat and pressure of the fixing unit.
❑
Press [OK].