Job Recall - Canon imageRUNNER 1750i Facsimile Manual

Job Recall

You can recall the last three destinations, scan settings, and send settings which
have been set, and then send your documents.
IMPORTANT
• The specified destinations, scan settings, and send settings are stored in memory
when:
- The control panel power switch is pressed
- (Start) is pressed
- (Reset) is pressed
- The Auto Clear mode activates
• The Standard mode is not stored in Recall memory.
NOTE
The three most recent settings stored in memory are not deleted when the power is
turned OFF.
1
2
Press
[Recall].
NOTE
If Restrict Recall in Restrict the Send
Function is set to 'On', [Recall] is not
displayed. (See Chapter 4, "Setting the
Send Function," in the System Settings
Guide.)
Press [1 Before], [2 Before], or [3
Before].
4
(SEND) ➞
4-51

Job Recall