Mechanical Adjustment; Adjusting The Paper Reference Position - Konica Minolta bizhub C450 Service Manual

Field Service Ver. 1.0 Mar. 2005
6.

Mechanical adjustment

6.1

Adjusting the paper reference position

4535F3E505DA
4535F3E506DA
A
4535fs3506c0
6. Mechanical adjustment
1. Call the Service Mode to the screen.
☞ For details of how to display the Ser-
vice Mode screen, see the Adjust-
ment/Setting of the main unit service
manual.
2. Touch "Machine"→"Printer Area"→
"Dup Print Positioning: Side Edge."
3. Touch "1st." and then press the
"Start" key. A test print will then be
produced.
4. Measure the width of printed refer-
ence line A.
Specifications: 3.0 mm
5. If the measured width A falls outside
the specified range, enter the correc-
tion value.
6. Produce another test print and check
for width A.
±
1.0 mm
9