Consumable Life Reminder; Unit Change; Software Switch Setting; Scan Caribration - Konica Minolta bizhub C450 Service Manual

10. Service Mode
10.9.4

Consumable Life Reminder

Functions • To select whether or not to give the display of PM parts lifetime
PM parts lifetime display: An entire screen warning is given when the service life
• Applicable units:
Transfer Belt Unit, Fusing Unit, Paper Dust Remover/Ozone Filter,
Transfer Roller Unit, IU (C, M, Y, K)
Use • Use to select not to give the display of PM parts lifetime.
Setting/ • The default setting is "Yes."
Procedure
10.9.5

Unit Change

Functions • To select who is to replace a unit.
• When the unit life arrives, the warning display is intended for the specific person who
is going to replace the unit.
When "User" is selected
When "Service" is selected : Life warning.
Use • Upon setup
Setting/ • The following are the default settings:
Procedure
Toner Cartridge
Imaging Unit
Waste Toner Box
Punch Dust Box
10.9.6

Software Switch Setting

Functions
Use
• Not Used
Setting/
Procedure
10.9.7

Scan Caribration

Functions • To set whether to use the calibration adjustment value set prior to the shipping.
Use • To be used when CCD unit has bee changed.
After replacing the CCD unit, the default value needs to be set since the calibration
value set for each unit changes to control the differences in reading performance on
each scanner (CCD).
Setting/ • The default setting is ON.
Procedure
NOTE
• When the setting is changed, the function becomes available by turning the
auxiliary power button OFF and ON again.
264
of a specific unit has been reached, prompting the
user to replace the part.
"Yes"
: Copying is inhibited.
US, Japan, Others 4
: "User" Service
: User "Service"
: User "Service"
: User "Service"
"ON"
Field Service Ver. 1.0 Mar. 2005
No
Europe, Others1/2/3
"User" Service
"User" Service
"User" Service
"User" Service
OFF