Field Service Ver. 1.0 Mar. 2005
6.4.3
Auto adjust: Main Scanning Direction
A. Adjustment procedure
1. Call the Service Mode to the screen.
2. Touch "ADF."
3. Touch "Auto Stop Position Adjustment."
4. Touch "Main Scanning Direction."
7. Check that Result is "OK" and then touch "SET."
8. Touch "END."
9. Touch "Exit" on the Service Mode screen.
If the Result is "NG":
• Check and correct the skew of the document.
• Manually correct the value of "Main Scanning Direction."
5. Place the chart furnished with the
[1]
6. Press the "Start" key.
4582fs3508c0
6. Mechanical adjustment
Document Feeder in the document
feeding tray (with the side having an
arrow facing up).
4037F3E531DA
25