Dup Print Positioning: Side Edge; Shifter Movement Timing Belt Adjustment - Konica Minolta bizhub C450 Service Manual

6. Mechanical adjustment
6.1.2

Dup Print Positioning: Side Edge

1. Call the Service Mode to the screen.
☞ For details of how to display the Service Mode screen, see the Adjustment/Setting of
the main unit service manual.
2. Touch "Machine" → "Printer Area."
3. Touch "Dup Print Positioning: Side Edge" → "3rd."
4. Press the Start key to let the machine produce a test pattern.
6.2

Shifter movement timing belt adjustment

[1]
[2]
22
A
4348fs3509c0
[2]
4348fs3501c0
Field Service Ver. 1.0 Mar. 2005
5. Measure the width of printed refer-
ence line A.
Specification: 3.0 mm
6. If the measured width A falls outside
the specified range, enter the correc-
tion value.
7. Produce another test print and check
to see if width A falls within the spec-
ified range.
1. Slide out the Drawer and remove it.
2. Lift the Main Drawer [1], and remove
two screws [2] fixing the Shift Tray.
NOTE
• When reinstalling, use caution
because the wire of the Main
Drawer comes off easily.
4061F3E706DA
±
1.0 mm