Dup Print Positioning: Side Edge - Konica Minolta bizhub C450 Service Manual

Field Service Ver. 1.0 Mar. 2005
11. Perform another test print and check the reference deviation.
12. Repeat the adjustment until the reference line falls within the specified range.
13. Tighten the adjustment screw.
14. Repeat steps 1 to 15 similarly for the tray4.
6.1.2

Dup Print Positioning: Side Edge

1. Call the Service Mode to the screen.
☞ For details of how to display the Service Mode screen, see the Adjustment/Setting of
the main unit service manual.
2. Touch "Machine" → "Printer Area."
3. Touch "Dup Print Positioning: Side Edge" → "3rd."
4. Press the Start key to let the machine produce a test pattern.
[2]
[1]
4348fs3601c0
[4]
[3]
4348fs3602c0
6. Mechanical adjustment
8. Slide out the drawer [1] and unload
paper from it.
9. Loosen three screws [2] at the center
of the Paper Lifting Plate.
10. Watching the graduations [3] pro-
vided in the drawer, move the Edge
Guide [4] in the rear.
• If width A is greater than the specified
value, move the Edge Guide toward
the front.
• If width A is smaller than the specified
value, move the Edge Guide toward
the rear.
4061F3E506DA
17