Konica Minolta bizhub C450 Service Manual page 228

Field Service Ver. 1.0 Mar. 2005
(8) IP Filtering
Functions • To set the IP Filtering.
Use • To set whether to receive IP address within the specified range of the value.
Setting/ <Permit Access>
Procedure 1. Select Enable or Disable on "Permit Access."
2. Select range Set 1 to Set 5, and input address using the 10-Key Pad.
3. Touch "OK" key.
<Deny Access>
1. Touch "Deny Access" key.
2. Select Enable or Disable on "Deny Access."
3. Select range Set 1 to Set 5, and enter address using the 10-Key Pad.
4. Touch "OK" key.
(9) RAW Port No.
Functions • To set the RAW port No.
Use • To set the RAW port number for the printer.
Setting/ 1. Select the necessary port number.
Procedure 2. Select to use or not to use.
3. When using the selected port, press the Clear key to clear the value, and enter the
RAW port number using the 10-Key Pad.
4. Touch "OK" key.
(10) DNS Host Name
Functions • To set the DNS Host name.
Use • To enter the DNS Host name.
Setting/ 1. Touch "DNS Host Name" key.
Procedure 2. Enter the DNS Host name on the screen key board, and touch "OK" key.
(11) DNS Domain Name
Functions • To set the DNS Domain name.
Use • To enter the DNS Domain name.
Setting/ 1. Touch "DNS Domain Name" key.
Procedure 2. Enter the DNS Domain name using the keyboard on the screen, and touch "OK" key.
B. NetWare Setting
(1) NetWare Setting
Functions • To enable or disable the NetWare setting.
Use • To use NetWare setting.
Setting/ • The default setting is OFF.
Procedure
ON
8. Utility Mode
"OFF"
191