Konica Minolta bizhub C450 Service Manual page 229

8. Utility Mode
(2) Ethernet Frame Type
Functions • To set the Ethernet Frame Type.
Use • To specify the Frame type for transmission.
Setting/ • The default setting is Auto Detect.
Procedure
"Auto Detect"
(3) Operation Mode
Functions • To set the Operation Mode.
Use • To change the Operation Mode.
Setting/ • The default setting is PServer.
Procedure
(4) Status
Functions • To display NetWare Status.
Use • To check NetWare status.
Setting/ 1. Touch "Status" key.
Procedure 2. Touch UP/Down arrow keys to select the server to check.
3. Check the NetWare status.
(5) Print Server Name/Print Server Password
Functions • To set the Print server name and Print server password.
Use • To enter the print server name or the print server password.
Setting/ 1. Touch "Print Server name" key or "Print Server Password" key.
Procedure 2. Enter the Print server name or the Print server password (up to 63 characters) using
the on-screen keyboard, and touch "OK" key.
(6) Polling Interval
Functions • To set the Polling interval.
Use • To set the interval to search the print queue.
Setting/ 1. Press the Clear key.
Procedure 2. Enter the Polling interval between 1 and 65535 using the 10-Key Pad.
(7) NDS/Bindery Setting
Functions • To set whether to enable or disable the Bindery setting when using NetWare4.X
model and after.
Use • To enable the Bindery service.
Setting/ • The default setting is NDS.
Procedure
192
802.2 802.3
"PServer"
"NDS"
Field Service Ver. 1.0 Mar. 2005
Ethernet II 802.2SNAP
Nprinter/Rprinter
NDS&Bindery