Konica Minolta bizhub C450 Service Manual page 123

6. Other
[6]
[7]
86
[5]
[4]
4036fs2548c0
4036fs2549c0
[8]
[9]
4036fs2550c0
[11]
[10]
4036fs2551c0
[12] [13]
4036fs2552c0
Field Service Ver. 1.0 Mar. 2005
9. Remove the Scanner Motor Assy.
☞ 82
10. Remove the screw [4] and then slide
the front pulley [5] toward the front.
11. Remove the Screw [6], and slide the
Wire Pulley [7] (Rear side) in the
direction of front side.
12. Remove the screw [8] and the Scan-
ner drive gear [9].
13. Snap off the C-clip [10] and remove
the bushing [11] (front).
14. Slide the shaft [12] toward the rear
and lift it. Then, remove the front and
rear pulleys [13].
15. Remove the Scanner Drive Cables.