Administrator/Machine Setting; One-Touch Registration - Konica Minolta bizhub C450 Service Manual

Field Service Ver. 1.0 Mar. 2005
(2) Foolscap Size Setting
Functions • To set the size for Foolscap paper.
Use • Upon setup.
• To change the size for Foolscap paper.
Setting/ • Select the size from among the following four.
Procedure
220 x 330 mm
8.6.2

Administrator/Machine Setting

A. Administrator Registration
Functions
• To register the information on Administrator and the From address for e-mail trans-
mission.
Use
Setting/ 1. Touch "Name" key, "E-Mail Address" key to input them.
Procedure 2. Using the 10-Key Pad, enter the Extension No.
B. Input Machine Address
Functions • To register the name of the Machine and E-mail address.
Use • The registered address will be used to receive e-mail in the box in the machine. It can
also be used as one of the From addresses for the scanner job.
Setting/ 1. Touch "Machine Name" key and input the name.
Procedure 2. Touch "E-mail" key, and input the address.
8.6.3

One-Touch Registration

A. Scan
(1) Address Book
<E-Mail>
Functions
• To register/change the e-mail address for transmitting the scanned data by e-mail.
Use
Setting/ • Touch "New" key to register the new address.
Procedure • Select any displayed address to check, change, or delete the setting.
<FTP>
Functions
• To register and change the FTP address for transmitting the scanned data by FTP.
Use
Setting/ • Touch "New" key to register the new address.
Procedure • Select any displayed address to check, change, or delete the setting.
<SMB>
Functions
• To register or change the SMB address for transmitting the scanned data by SMB.
Use
Setting/ • Touch "New" key to register the new address.
Procedure • Select any displayed address to check, change, or delete the setting.
81/2 x 13 81/4 x 13
8. Utility Mode
81/8 x 131/4 8 x 13
183