Konica Minolta bizhub C450 Service Manual page 201

8. Utility Mode
(5) CR/LF Mapping
Functions • To set the mode for replacing data when printing the text data.
Use • To change the mode for replacing data when printing the text data.
Mode 1 : Replacing CR with CR-LF
Mode 2 : Replacing LF with CR-LF
Mode 3 : Replacing with CR-LF
OFF
Setting/ • The default setting is OFF.
Procedure
D. PS Setting
(1) PS Error Print
Functions • To set whether to print or not the error information when an error occurred during PS
rasterizing.
Use • To print the information concerning the PostScript error.
Setting/ • The default setting is OFF.
Procedure
E. Print Reports
Functions • To output the report or Demo Page concerning the print setting.
Use • To check the setting concerning the printer.
The types of report available for output are as follows.
Configuration Page : The list of printer setting will be output.
Demo Page
PCL Font List
PS Font List
1. Touch "User Setting" → "Printer Setting" → "Print Reports" key.
Setting/
Procedure 2. Select the report to be output.
3. Select the Paper Take-up Tray and press the Start key.
164
: Does not replace
Mode 1 Mode 2
ON
: The test page will be output.
: PCL Font List will be output.
: PS Font List will be output.
Field Service Ver. 1.0 Mar. 2005
Mode 3 "OFF"
"OFF"