Scanner Motor (M201) - Konica Minolta bizhub C450 Service Manual

6. Other
6.3.32

Scanner Motor (M201)

A. Removal Procedure
1. Remove the ADF.
2. Remove the Rear Cover and IR Upper Rear Cover.
☞ 52
3. Remove 16 screws [1].
4. Remove the Connector and the reinforcement frame [2].
[1]
82
[13]
4037F2C075DA
[2] [1]
[1]
[3]
4036fs2091c0
Field Service Ver. 1.0 Mar. 2005
NOTE
• After replacing the LPH Unit, be
sure to turn four Drive Hubs [13] to
release locking. Proceeding with
job while still being locked may
unintentionally release the locking
condition, thus damaging the Drive
hub.
• For installation of the LPH Unit,
lock four Drive hubs again before
installation.
• When the LPH Unit has been rein-
stalled, be sure to run "Stabilizer"
available from "Image Adjust" of
the Service Mode.
[1]
[1] [1]
5. Remove the tension spring [3] for the
Scanner Motor belt.
[1]
4037F2C076DB