Konica Minolta bizhub C450 Service Manual page 244

Field Service Ver. 1.0 Mar. 2005
(3) Number of RX Call Rings
Functions • To set the number of times to receive call rings.
Use • To change the number of times of the fake RingBack tone after it starts calling until it
starts receiving.
Setting/ • The default setting is 2 X.
Procedure
(4) Number of Redials
Functions • To set the number of redials.
Use • To change the number of times to redial when the line is busy, etc.
• The line which can be set up is different depending on the country.
Setting/ • The default setting is 3 X.
Procedure
NOTE
• The line which can be set up is different depending on the country.
(5) Redial Interval
Functions • To set the interval for redialing.
Use • To change the interval for redialing.
Setting/ • The default setting is 3 min.
Procedure
(6) Line Monitor Sound
Functions
• To set whether to output the Line monitor sound from the speaker or not.
Use
Setting/ • The default setting is OFF.
Procedure
(7) Line Monitor Sound Volume
Functions • To set the volume of the speaker.
Use • To change the volume of the speaker.
Setting/
• Change the volume by touching the "Lower" or "Higher" keys.
Procedure
D. TX/RX Setting
(1) Duplex Print (RX)
Functions • To set whether to carry out the Duplex print for the received original when receiving
Fax.
Use • To carry out the Duplex print for the received original.
Setting/ • The default setting is OFF.
Procedure
"2 X" (0 to 15)
"3 X" (0 to 7)
"3 min" (1 to 15)
ON
ON
8. Utility Mode
"OFF"
"OFF"
207