Konica Minolta bizhub C450 Service Manual page 607

6. Mechanical adjustment
18
A
4348fs3509c0
Field Service Ver. 1.0 Mar. 2005
5. Measure the width of printed refer-
ence line A.
Specification: 3.0 mm
6. If the measured width A falls outside
the specified range, enter the correc-
tion value.
7. Produce another test print and check
to see if width A falls within the spec-
ified range.
8. Repeat steps 1 to 7 similarly for the
tray4.
±
1.0 mm