Color Developing Motor (M6) - Konica Minolta bizhub C450 Service Manual

Field Service Ver. 1.0 Mar. 2005
6.3.46

Color Developing Motor (M6)

[4]
Cautions when mounting the Color Developing Motor:
• Before mounting the Color Developing Motor, be sure to check the assembled
position of PC Gear. If its position is improper, make positioning adjustment.
A. Checking method
1. Slowly turn the PC Gear/1 [1], and fit the hole A [3] and B [4] with the Gear holes as
shown on the above figure.
2. Visually check if the hole A [3] and B [4] are fit with each Gear hole at the same time.
[1]
[3]
[2]
4037F2C099DA
[4]
[6]
[5]
4036fs2108c1
[1]
[2]
[3]
1. Remove the PWB Box.
☞ 93
2. Remove eight Connectors [1] on the
High Voltage Unit/1.
3. Remove two Screws [2], and remove
the Harness Holder [3].
4. Remove four Screws [4] and Con-
nector [5], and remove the Color
Developing Motor [6].
6. Other
[4]
4036fs2638c0
103