ASEEMBLY AND DISASSEMBLY OF INTAKE SYSTEM
Remove accessories around the engine:
1.Loosen fastening clamp, demount air
cleaner and air intake hose.
2.Remove throttle cable and clutch cable.
3.Remove all intake pipes and vacuum
hoses around engine.
4.Put down water hose to discharge
anti-freeze liquid.
5.Disassemble the throttle position sensor/
canister
solenoid/crankshaft
sensor/Injection nozzle / knock sensor
and wire plugs on electric components
like fuel pressure switch.
CANISTER SOLENOID AND INTAKE/EXHAUST PIPE
Assembly:
——Fix the solenoid on the intake manifolds
with a semicircular clamp and tighten
two inner bolts.
——Install the solenoid intake pipe between
the activated canister and the solenoid,
then tighten the clamp around the intake
pipe with special tool.
——Install solenoid exhaust pipe between the
throttle body and the solenoid. then
tighten the clamp around the exhaust
pipe with special tool.
position
F-7