A/C System Components - Chery automobile Service Manual

1. Function description of A/C control panel
(1) Blower switch
(2) Temperature control switch
(3) Air-flow distribution switch
(4) A/C ON/OFF
(5) Internal circulation switch
2. Removal/Installation of A/C compressor
(1) Drain off the coolant (see the coolant
recycling procedure)
(2) Loosen the drive belt, and remove it
(3) Remove the air filter and generator
(4) Remove the refrigerator pipes, and pull out
the electromagnetic clutch connector
(5) Remove the two bolts (M10*110) (with
tightening torque of 45±5N·m) used to
secure the compressor and its support.
(6) Install it in the reverse order of removal
Compressor Position
Performance Parameters:
Chery A15LHD with the electronic fuel
injection type engine adopts the SD7V16 type
compressor, the performance parameters of
which are shown in the table below.

A/C SYSTEM COMPONENTS

and Related
U-14