Removal & Installaton Of Trunk Lid - Chery automobile Service Manual

----Loosen the bolts between central locking
unit and doorframe. Disconnect the lock
rod with lock to remove cable and
servomotor.
INSTALLATION
Install in the reverse order of removal.
ADJUSTMENT
----If adjust door lock striker erroneously,
which normally causes a failure in closing
the door, position of lock striker shall be
adjusted. The adjusting operation means
that the lock striker is to be loosened with
15mm spanner, and then move as per
requirement. Tightening
50±5N·m.
REMOVAL & INSTALLATON OF
TRUNK LID
REMOVAL, INSTALLATION
ADJUSTEMENT OF TRUNK LID
------In removing trunk lid, it is needed to
remove the flexible hanging strap and the
rear bracket.
torque is
&
S-33