Chery automobile Service Manual page 55

Rinsing and inspection
Rinse and clean the carbon deposit on the
piston, piston ring and pin.
Rinse and clean the carbon deposit on the
bottom of the cylinder bore.
Measure the diameter of the cylinder bore.
480 M cylinder bore (unit: mm)
Ex-factory
grouping
Ex-factory
repair
For
Oversized by 0.29
Maintenance
Oversized by 0.5
Grind the cylinder bore according to the size for
maintenance with the grinding angle to be 50
~60 .
Measure the piston from the point that is 19mm
away from the bottom of the skirt.
1 79.94-79.95
2 79.95-79.96
3 79.96-79.97
4 79.97-79.98
A 80.23-80.24
B 80.24-80.25
C 80.25-80.26
Standard 79.965-77.975
80.245-80.255
80.466-80.475
B-34
480 E cylinder bore (unit: mm)
1
2
3
4
A
B
C
Standard
Oversized by 0.29
Oversized by 0.5
79.94-79.95
79.95-79.96
79.96-79.97
79.97-79.98
80.23-80.24
80.24-80.25
80.25-80.26
79.965-77.975
80.245-80.255
80.466-80.475