Chery automobile Service Manual page 228

Assemble the needle bearing, synchronizer
ring, and gear of 2nd and 3rd driven gear.
When you assemble the 3rd driven gear, make
sure that the side with bulge towards 2nd
driven gear.
Use snap ring to adjust the axial size after the
assembly of 3rd driven gear. Choose the
thickest snap ring from the permitted size and
assemble it into the snap ring groove. Make
sure that the snap ring can not too big and can
be assembled into the groove.
Part No.
015-1700381AA
015-170038AB
015-1700381AC
015-1700381AD
015-1700381AE
Make sure put the balance spring of fork shaft
into the clutch housing fork shaft hole.
thickness mm
2.8
2.9
3.0
3.1
3.2
J-22