Disassembly And Assembly Of Rear Door Trim Panel; Disassembly/Assembly Of Carpet For Passenger Compartmen - Chery automobile Service Manual

DISASSEMBLY AND ASSEMBLY OF
REAR DOOR TRIM PANEL
Disassembly:
1. Remove the armrest decorative fastening
bolt, and dismantle the armrest cover and
armrest base. Remove the inner door open
handle guard frame. Remove the safety
handle.
2. Remove the fastening bolt between the trim
panel and doorframe.
Assembly:
Assembly is the reverse of disassembly.
The tightening torque of the screw for the inner
handle assembly is 1.5±0.15N·m.
Note: Appropriate measures should be taken to
avoid dirtying the working area during
disassembly and assembly. It is very important
to maintain the cleanliness inside the car
during working.
DISASSEMBLY/ASSEMBLY OF CARPET
FOR PASSENGER COMPARTMENT
Disassembly:
Remove the fixed decoration between the seal
and the carpet. Loosen the fastening bolt
between the floor and the safety belts of
passenger seats. Remove the oil pan. Use a
plug extraction tool to remove the fastening
plug for the carpet
Assembly:
Assembly is the reverse of disassembly.
Remember that the tightening torque of safety
belt is 50±10N·m.
S-28