Removal/Installation And Check Of Steering Gear - Chery automobile Service Manual

Disassembling Illustration of the Steering Column
1- Horn Button Cap
5- Serrated Set Bush;
9- Steering Gear Lock Housing and Steering Column Switch
11-Steering Shaft
14- Hex Bolt
17-Safty Screw

REMOVAL/INSTALLATION AND CHECK OF STEERING GEAR

Lift the whole vehicle at a designated safe
place with a lifter
·Remove the high and low pressure oil tube
of the steering gear with torques of 45±3N·m
and 30±3N·m respectively.
·Remove the joint piece of the steering link
·Remove the shift shaft bracket
·Remove the front tube and the three way
catalytic converter with torques of 60±3N·m
2-Nut 40N·m
6-Spring
12-Nut 30N·m
15-Spring
18-Washer
N-6
20
3- Spring Washer;
7-Lower Trim Cover
13- Steering Universal Joint
16- Steering Column Lower Bearing
19-Steering Tube
Two bolts on one side of the steering gear are
shown as the picture below. Tightening
torque: 30±3N·m.
4-Steering Wheel
8- Upper Trim Cover
10- Support ring
20- Clip