Connector - Chery automobile Service Manual

Hide thumbs Also See for automobile:

Table of Contents

·Use the appropriate tools to remove a terminal as

shown. When installing a terminal, be sure to

insert it until it locks securely.

·Insert a thin piece of metal from the terminal side

of the connector and with the terminal locking tab

pressed down, pull the terminal out from the

connector.

Sensors, Switches, and Relays

·Handle sensors, switches, and relays carefully.

Do not drop them or strike them against other

Wiring Harness

Wiring color codes

·Two-color wires are indicated by a two-color code symbol.

·The first letter indicates the base color of the wire and the second the color of the stripe.

·When replacing a fuse, be sure to replace it with

one of the same capacity. If a fuse fails again, the

circuit probably has a short and the wiring should

be inspected.

·Be sure the negative battery terminal is

disconnected before replacing a main fuse.

·When replacing a pullout fuse, use the fuse

Show Quick Links

Table of Contents