ABOUT THIS GUIDE
Introduction
The MP6000 Integrator Guide provides information on installing, operating, and programming the MP6000.
Chapter Descriptions
Following are brief descriptions of each chapter in this guide.
•
Chapter 1, PRODUCT OVERVIEW AND FEATURES
configurations, peripherals, and features.
•
Chapter 2, HOST INTERFACES AND CABLE PINOUTS
MP6000, how to connect the MP6000 to a host, setup, and cable pin-outs. It also includes host interface bar
codes.
•
Chapter 3, SITE PREPARATION AND INSTALLATION
top.
•
Chapter 4, SCALE CALIBRATION (MODELS WITH A SCALE ONLY)
measurement, calibrate the scale, verify calibration, and recognize errors.
•
Chapter 5, OPERATING THE SCANNER
LED indicators, and scanning.
•
Chapter 6, 123SCAN2
•
Appendix A, MAINTENANCE, TROUBLESHOOTING, AND ERROR CODES
troubleshooting, and maintenance information.
•
Appendix B, TECHNICAL SPECIFICATIONS
•
Appendix C, HOST INTERFACE CHARACTER SETS
interfaces.
Notational Conventions
This document uses these conventions:
describes how to operate the MP6000 including buttons, switches,
provides information about configuring the MP6000 using the 123Scan
provides technical information about the MP6000.
provides an overview of the MP6000 including
describes the host interfaces supported by the
describes how to install the MP6000 into a counter
describes how to change weight
provides error/warning codes,
provides ASCII character sets for some host
2
utility.