Motorola MP6000 Integrator Manual page 176

A - 4 MP6000 INTEGRATOR GUIDE
(Underneath Cover)
UI Board and Top LED Board
Figure A-3
Replace all covers.
5.
Replace the platter on the unit.
6.
Remove any objects from the platter, or near the unit and re-apply power to the MP6000 and attached
7.
equipment (POS, hand-held scanner).
Wait for the unit to boot, and listen for start-up audio indicators.
8.
If the LED display codes persist contact your Motorola qualified Service Provider.
9.
LED PCB
UI PCB
(Underneath Cover)