Motorola MP6000 Integrator Manual page 47

RS-232 Host Parameters (continued)
Terminal Specific RS-232
Table 2-6
Parameter
Baud Rate
Parity
Stop Bit Select
ASCII Format
Hardware Handshaking
Software Handshaking
Serial Response Timeout
RTS Line State
Beep On <BEL>
Transmit Code ID
Data Transmission Format
Prefix
Suffix
The CUTE host disables all parameter scanning, including Set Defaults. If you inadvertently select CUTE,
scan Enable Parameter Bar Code Scanning (located in the MP6000 Bar Code Programming Guide) then
change the host selection.
Olivetti Omron
9600 9600
Even None
One One
7-Bit 8-Bit
None None
ACK/NAK None
9.9 Sec. 9.9 Sec.
Low High
Disable Disable
Yes Yes
Prefix/Data/Suffix Data/Suffix
STX (1002) None
ETX (1003) CR (1013)
HOST INTERFACES AND CABLE PINOUTS 2 - 17
NCR
(Single
CUTE
Cable
Scale)
9600 9600
Even Odd
One One
7-Bit 7-Bit
None None
None None
9.9 Sec. 9.9 Sec.
High High
Disable Disable
Yes Yes
Prefix/Data/ Prefix/
Suffix Suffix *
STX (1002) STX *
CR (1013) ETX ETX *
(1003)
Datalogic
9600
Odd
One
7-Bit
None
None
9.9 Sec.
High
Enable
Yes
Data/Suffix
None
CR (1013)