Pos - Motorola MP6000 Integrator Manual

An additional USB port is available in the front under the platter. All USB ports can be used for
NOTE
the USB staging flash drive. See
5-11 for additional information.

POS

RJ-45, Primary POS
Table 2-15
Pin # Signal/Name
1 DETECT
2 5V
3 GND
4 TXD/IBM-A
5 RXD/D+
6 RTS/IBM-B
7 CTS/USB D-
8 DOWNLOAD
9 N/C
10 12V
* Terminal systems vary in power capabilities. Ensure your system power supply is capable
of the MP6000 configuration power requirements. For terminals unable to support P.O.T., a
12V DC barrel jack is available for external power.
12V DC
12V DC Jack, 2.5mm
Table 2-16
Pin # Signal/Name
1 EXT 12V
2 GND
HOST INTERFACES AND CABLE PINOUTS 2 - 55
Table 1-3 on page 1-14
Direction
Out USB cable detect output
In USB cable 5V detect input
N/A Signal ground
Bidirectional Multiplexed serial TXD/IBM-A
Bidirectional Multiplexed serial RXD/USB D+
Bidirectional Multiplexed serial RTS/IBM-B
Bidirectional Multiplexed serial CTS/USB D
In POS download
N/A
In Terminal 12VDC to MP6000
(Power From Terminal)
Direction
In Center pin: 12VDC (primary power)
N/A Barrel: signal ground
and USB Staging Flash Drive on page
Description
*
Description