About This Guide
Introduction
This document is intended for those who wish to setup and operate the FX9500 RFID Reader system. Before
attempting to install, configure, and operate this product, you should be familiar with the following:
•
Windows-based software installation and operation
•
Device communication parameters including Ethernet and serial communications
•
RFID reader configuration including antenna placement
•
Basic digital input/output control.
NOTE
Screens and windows pictured in this guide are samples and may differ from actual screens.
Configurations
This guide covers the following FX Series of RFID reader configurations:
•
US and Canada 4-port configuration, part number: FX9500-41324D41-US
•
International 4-port configuration, part number: FX9500-41324D41-WW
•
US and Canada 8-port configuration, part number: FX9500-81324D41-US
•
International 8-port configuration, part number: FX9500-81324D41-WW.