OPERATING THE SCANNER
5 - 7
Platter
The platter covers the horizontal scan window, and scale (if applicable). It also accommodates product
placement. The sapphire platter glass is built for long term reliability and clarity, and is impervious to scratches
except from industrial diamonds.
Installing/Removing the Short and Medium Non-Scale Platters
To remove the platter push the front, left corner of the platter to lift it slightly. Use your fingers under the platter
to lift it up and out.
Removing Short Platter
Figure 5-7
To install the platter drop the tower end down into the unit and lay it flat.
Installing/Removing the Long Non-Scale and Medium Scale Platters
These platters have a lip at the cashier end which can be gripped for lifting.
To install the platter(s) drop the tower-end of the platter into the MP6000 first, and then lower the cashier end
down using the lip.
To remove the platter(s) use the lip on platter at the cashier end to lift and then remove the platter.