Motorola MP6000 Integrator Manual page 105

Snap the scan window cover into place on the tower, over the CSS scan window.
6.
Snapping the Scan Window Cover in Place
Figure 3-19
NOTE Ensure you hear and feel three distinct snaps: one for each snap mechanism (lower, front, rear), to ensure
a snug fit in the rear tower.
Connect the USB cable to the top USB auxiliary port (recommended) on the MP6000. Route the cable into
7.
the side cable slots as shown.
Connecting the USB Cable
Figure 3-20
SITE PREPARATION AND INSTALLATION 3 - 19
Side Cable Slots
Top USB Auxiliary Port