Usb Host Parameters; Usb Device Type - Motorola MP6000 Integrator Manual

2 - 6 MP6000 INTEGRATOR GUIDE

USB Host Parameters

USB Device Type

To select a USB device type, scan one of the bar codes listed in
NOTE 1. When changing USB device types, the MP6000 automatically resets and issues the standard startup
beep sequences.
2. Before selecting CDC COM Port Emulation, install the Motorola USB CDC driver on the host to ensure
the scanner does not stall during power up (due to a failure to enumerate USB). If the scanner stalls,
recover it by installing the CDC INF file, and reboot the MP6000.
NOTE This guide includes limited parameter bar codes. For ALL MP6000 programming bar codes, refer to
MP6000 Bar Code Programming Guide (p/n 72E-172633-xx
USB Host Parameters
Table 2-1
USB Device Type
IBM Table-top USB (default)
IBM Hand-held USB
IBM OPOS
(IBM Hand-held USB with Full Scan Disable)
HID Keyboard Emulation
CDC COM Port Emulation
Parameter
Table 2-1.
).
Page
Number
2-7
2-8
2-9
2-10
2-11
the