Verification Test - Motorola MP6000 Integrator Manual

4 - 8 MP6000 INTEGRATOR GUIDE
•
Step 4 - Calibration at LOAD
•
A user scans Scale Reset (refer to the MP6000 Bar Code Programming Guide, p/n 72E-172633-xx).
When Scale Reset is scanned, a test runs, showing a series of characters on the optional Scale Display.
When the test completes, the scale returns to its prior state before entering a scale Calibration Mode.
See Table 4-6 on page 4-20 (Cold reset of

Verification Test

Table 4-3 describes the five tests needed to verify whether or not the scale was calibrated successfully.
Tests to Verify Scale Accuracy
Table 4-3
Test
Increasing Load Test
Over Capacity Test
Decreasing Load Test
Return to Zero Test
Shift Test
The verification tests outlined in
table based on US (lb), or metric scales (kg), using applicable tolerance for single or dual interval scale
models.
Verification Tests for US (lb) Scales
Table 4-4
Verification Test for US
Scale Applied Load lb
Increasing Load Test
0.00
0.10
5.00
10.00
20.00
30.00
Over Capacity Test
Over Capacity 30.20
Decreasing Load Test
30.00
completes successfully, or unsuccessfully (fails).
scale) for the character sequence displayed.
This test verifies accurate weight measurement with increasing weights placed
incrementally on the scale's platter, without returning weight to zero.
This test verifies that the correct indication appears on the Scale Display when
the maximum weight is exceeded.
This test verifies accurate weight measurement with decreasing weights removed
incrementally from the scale's platter, without returning weight to zero.
This test verifies that the scale returns to zero when all weights are removed.
This test verifies accurate weight measurement in all quadrants.
Table 4-4 and Table 4-5
Indication = Applied
Load Within
Applicable
Tolerances
0.00
0.10
5.00
10.00
20.00
30.00
EEEE
30.00
Description
can be run in successive order. Use the appropriate
All Tolerances All Tolerances
Are +/- Are +/-
Acceptance Acceptance
Single Int Dual Int
0.0 lb 0.0 lb
.005 lb .0025 lb
.005 lb .005 lb
.01 lb .005 lb
.01 lb .01 lb
.015 lb .015 lb
N/A N/A
.015 lb .015 lb